Home>Products>Bearing Slewing Ring>280.30.1075.013 Type 110/1200. Standard 5 Slewing Ring Bearings
Standard 5 280.30.1075.013 Type 110/1200. MODELS
Need a CAD or 3D Model?
280.30.1075.013 Type 110/1200. Standard 5 Slewing Ring Bearings
Bearing Slewing Ring
Standard 5 280.30.1075.013 Type 110/1200. Bearing SPECIFICATIONS
280.30.1075.013 Type 110/1200. Standard 5 Slewing Ring Bearings, Units and Housings CAD models , 2000 rpm Grease Speed Rating Open/Shielded n1 Bearing Slewing Ring Manufacturing Service . Get BEARING DRIVESHAFT,INC. Your 2.00 mm Fillet Radius ra Free.
- Standard 5
280.30.1075.013 Type 110/1200.
- 2000 rpm
- 280.0000 mm
- 2.00 mm
- 2600 rpm
- Two Seals & Snap-Rin
- 1400 rpm
- 46.00 mm
- 200000 N
-
BEARING DRIVESHAFT,INC.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
280.30.1075.013 Type 110/1200. Standard 5 Slewing Ring Bearings Specifications
- 2000 rpm
- 280.0000 mm
- 2.00 mm
- 2600 rpm
- Two Seals & Snap-Rin
- 1400 rpm
- 46.00 mm
- 200000 N
- 180.000 mm
- 190000 N
Standard 5 280.30.1075.013 Type 110/1200. 280.30.1075.013 Type 110/1200. Standard 5 Slewing Ring Bearings Systems
No. | Brand | M | T | B | d | s | A | N | E |
62.20.0944.500.01.1503 | Standard 5 | - | - | 66.70 mm | 70.000 mm | - | - | - | - |
92.35.1802.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
282.30.1100.013 Type 110/1300.2 | Standard 5 | - | 36 mm | 33 mm | 65 mm | - | - | - | - |
61.25.1455.500.11.1503 | Standard 5 | - | - | 264 mm | 500 mm | - | - | - | - |
281.30.1100.013 Type 110/1300.1 | Standard 5 | - | - | - | - | - | - | - | - |
62.40.1500.001.29.1504 | Standard 5 | - | - | - | - | - | - | - | - |
12.20.1360.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
280.30.1475.013 Type 110/1600. | Standard 5 | - | - | - | - | - | - | - | - |
162.25.1077.890.11.1503 | Standard 5 | - | - | 130.00 mm | 260.000 mm | - | - | - | - |
60.25.0955.500.11.1503 | Standard 5 | - | - | 6 mm | 4 mm | - | - | - | - |
280.30.1175.013 Type 110/1300. | Standard 5 | - | - | - | 85 mm | - | - | - | - |
281.30.1275.013 Type 110/1400.1 | Standard 5 | - | - | - | 31.800 mm | - | - | - | - |
162.25.1320.891.21.1503 | Standard 5 | - | - | 63.50 mm | 70.000 mm | - | - | - | - |
62.20.0944.575.01.1403 | Standard 5 | - | - | 54 mm | 80 mm | - | - | - | - |
11.20.1220.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
162.28.1700.890.11.1503 | Standard 5 | - | - | 20.6 mm | 20 mm | - | - | - | - |
162.25.0886.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
62.25.1255.575.11.1403 | Standard 5 | - | - | 185 mm | - | 17 mm | - | - | mm |
62.20.1094.500.01.1503 | Standard 5 | - | - | - | - | 23 mm | - | 50 mm | - |
91.35.1802.991.41.1502 | Standard 5 | - | 58 mm | 55 mm | - | - | - | - | - |
61.25.0980.890.11.1503 | Standard 5 | - | - | 96.00 mm | 95.000 mm | - | - | - | - |
161.28.1400.890.11.1503 | Standard 5 | - | - | 15 mm | 15 mm | - | - | - | - |
11.20.0971.001.21.1504 | Standard 5 | - | - | 39.70 mm | 45.000 mm | - | - | - | - |
11.25.1200.600.11.1503 Standard 5 Slewing Ring Bearings | Da max.:94 mm; Preload class C GC:295 N; Basic static load rating C0:21.6 kN; Calculation factor f2C:1.05; Preload class A GA:49 N; D:100 mm; Calculation factor f:1.07; a:20.1 mm; d:65 mm; da min.:71 mm; Mass bearing:0.47 kg; C2:4.3 mm; b:1.5 mm; Preload class B GB:98 N; Calculation factor f2A:1; Basic dynamic load rating C:19.9 kN; Static axial stiffness, preload class B:54 N/µm; Calculation factor f1:1; |
230.21.1075.013 Type 21/1200. Standard 5 Slewing Ring Bearings | h1:230 mm; d4 ≈:105 mm; Basic static load rating C0:655 kN; Basic dynamic load rating C:1140 kN; l4 max.:324 mm; Specific dynamic load factor K:300 N/mm²; r1 min.:1 mm; B:55 mm; l3 min.:85 mm; l5 ≈:45 mm; d:80 mm; α:5 °; d2 max.:182 mm; G:M 64x4; Mass rod end:15 kg; C1 max.:48 mm; l7 min.:90 mm; w:88 mm; dk:105 mm; |
232.20.0900.013 Type 21/1050.2 Standard 5 Slewing Ring Bearings | G:M 64x4; C1 max.:48 mm; Material constant KM:330; l2 max.:364 mm; B:55 mm; dk:105 mm; Mass rod end:12 kg; Basic dynamic load rating C:400 kN; r1 min.:1 mm; h:270 mm; l7 min.:98 mm; d2 max.:182 mm; Specific dynamic load factor K:100 N/mm²; α:5 °; l1 min.:140 mm; Basic static load rating C0:585 kN; d:80 mm; |
62.30.1400.000.11.1504 Standard 5 Slewing Ring Bearings | H2:28.575 mm; h:28.575 mm; Cap bolt, SAE grade:5; End plug (suffix Y):EPR 7; S:3.175 mm; A1:79.375 mm; Appropriate attachment bolt size G:0.625 in; Mass pillow block:12.7 kg; R2:21.431 mm; da:61.913 mm; Cap bolt:2 x 1/2-13 UNC; Initial grease fill:68.04 g; Pa:6.94 kN; Stabilizing ring:SR-15-0; Taconite seal:TER 37; RG:1/4 NPT; Ca:37.008 mm; P90°:45.4 kN; Max. speed for Taconite seal:1250 r/min; |
280.30.1475.013 Type 110/1600. Standard 5 Slewing Ring Bearings | RG:1/8 NPT; Cap bolt, SAE grade:5; ba:27.781 mm; H2:25.4 mm; Cap bolt:2 x 1/2-13 UNC; J max.:241.3 mm; Stabilizing ring:2 x SR-13-0; R2:15.875 mm; H1:76.2 mm; J min.:206.375 mm; R1:44.45 mm; H:147.637 mm; L:279.4 mm; P120°:17.8 kN; P90°:30.2 kN; Labyrinth ring (dc shaft position):LOR 37; da:65 mm; Ca:39.014 mm; Pa:12 kN; db:77.787 mm; |
60.25.0955.575.11.1403 Standard 5 Slewing Ring Bearings | ba:92.869 mm; Da:339.999 mm; R1:120.65 mm; P90°:173 kN; h:63.5 mm; End plug (suffix Y):EPR 21; J max.:619.125 mm; J min.:549.275 mm; Cap bolt, SAE grade:5; S:4.763 mm; RG:1 NPT; A1:190.5 mm; Stabilizing ring:SR-38-32; Mass pillow block:172 kg; P150°:94.3 kN; Initial grease fill:1672.65 g; Housing:SAW 538; H1:200.025 mm; PG:1/4 NPT; Cap bolt recommended tightening torque:271.2 N·m; |
162.25.0886.891.21.1503 Standard 5 Slewing Ring Bearings | R1:60.325 mm; P60°:141 kN; Cap bolt:1/2-13 UNC; H1:101.6 mm; J min.:263.525 mm; P120°:53.4 kN; N1:23.813 mm; Bearing limiting speed:5300 r/min; End plug (suffix Y):EPR 11; ba:40.481 mm; Labyrinth ring:2 x LOR 187; Da:160 mm; S:4.763 mm; da:82.55 mm; P90°:84.5 kN; J max.:295.275 mm; P180°:58.7 kN; PG:1/8 NPT; A1:98.425 mm; Ca:49.809 mm; |
11.25.1800.000.11.1503 Standard 5 Slewing Ring Bearings | B:9.00 mm; Grease Speed Rating Open/Shielded n1:24000 rpm; Oil Speed Rating Open/Shielded n2:30000 rpm; Sealed Speed Rating n3:17000 rpm; Grease Speed Rating n1:24000 rpm; d:10.000 mm; Accessories:One Seal; D:30.0000 mm; Basic Static Radial Load Rating Co:2360 N; Fillet Radius ra:0.64 mm; Oil Speed Rating n2:30000 rpm; Basic Dynamic Radial Load Rating C:5070 N; |
92.35.1802.991.41.1502 Standard 5 Slewing Ring Bearings | Cap bolt:2 x 3/4-10 UNC; Da:200 mm; H:239.316 mm; RG:3/8 NPT; Ca:62.789 mm; N1:22.225 mm; Pa:17.3 kN; PosiTrac Plus contact element:2 x B10724-109; R1:67.866 mm; End plug (suffix Y):EPR 13; Initial grease fill:232.47 g; h:45.244 mm; P180°:60.9 kN; Max. speed for PosiTrac Plus seal:1450 r/min; P120°:55.6 kN; A2:165.1 mm; R2:31.75 mm; Cap bolt recommended tightening torque:203.4 N·m; ba:50.006 mm; |
62.25.1077.890.11.1503 Standard 5 Slewing Ring Bearings | H1:36 mm; a:135 mm; r3,4 min.:0.6 mm; Angle between holes in outer ring (Pitch) α:30 °; Required attachment bolt size (DIN 912):M8; Number of attachment bolts:12; Basic dynamic load rating C:80 kN; N:8.8 mm; Frictional moment:1.3 N·m; ra max.:0.6 mm; r1,2 min.:0.6 mm; Static moment stiffness:880 N·m/mrad; Preload:4890 N; da min.:56 mm; Static axial stiffnes:1240 N/µm; D2:80 mm; |
60.20.0844.500.01.1503 Standard 5 Slewing Ring Bearings | D:42.0000 mm; Oil Speed Rating n2:20000 rpm; Oil Speed Rating Open/Shielded n2:20000 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:12000 rpm; Basic Static Radial Load Rating Co:5400 N; d:15.000 mm; Accessories:Two Seals; Basic Dynamic Radial Load Rating C:11400 N; B:13.00 mm; Grease Speed Rating Open/Shielded n1:17000 rpm; Grease Speed Rating n1:17000 rpm; |
61.40.1600.008.19.1503 Standard 5 Slewing Ring Bearings | d:120 mm; 2B:116 mm; Calculation factor Y0:1.6; Calculation factor Y1:1.6; b:10 mm; Reference speed:2000 r/min; Da min.:181 mm; Basic static load rating C0:1400 kN; r3,4 min.:2.5 mm; da max.:137 mm; ra max.:2.5 mm; Mass bearing pair:18.6 kg; rc max.:1 mm; Fatigue load limit Pu:143 kN; Calculation factor Y2:2.3; K:7.5 mm; r5 min.:1 mm; Calculation factor e:0.43; Limiting speed:3000 r/min; Da max.:203 mm; |
280.30.1075.013 Type 110/1200. Standard 5 Slewing Ring Bearings Video
Standard 5 280.30.1075.013 Type 110/1200. INTERCHANGE
Bearing Slewing Ring Part series 280.30.1075.013 Type 110/1200. is a potential replacement for these common bearing part numbers:
280.30.1075.013 Type 110/1200.
280.30.1075.013 Type 110/1200.
280.30.1075.013 Type 110/1200.
280.30.1075.013 Type 110/1200.
280.30.1075.013 Type 110/1200.
280.30.1075.013 Type 110/1200.
280.30.1075.013 Type 110/1200.
280.30.1075.013 Type 110/1200.
Contact Us
![](http://best-sec.net/uploaded_images/6368.jpg)
- BEARING DRIVESHAFT,INC.
- Address8251 South International Drive, Columbus, IN 47201,U.S.A.
- Phone(Working Time)342-6598
- Fax
Standard 5 280.30.1075.013 Type 110/1200. Technical Articles
ORBIT BEARING PRICE LIST |
NBC BEARING RATE LIST |
BMT BEARING PRICE LIST |
Bearing Slewing Ring CATEGORIES
- BEARINGS FOR METRIC AND INCH SHAFT SIZES
- Cylindrical Roller Bearings
- Deep Groove Ball Bearings
- Sealed Spherical Roller Bearings Continuous Casting Plants
- Spherical Roller Bearings
- 61903 Bearings
- Skf 6004 2rs Bearing
- Skf 6203 Bearings
- Skf 6003 Bearing
- Railway Rolling Spherical Roller Bearings
- Double Row Tapered Thrust Roller Bearings
- Thrust Ball Bearings
- Thrust Tapered Roller Bearing
- Four-Row Tapered Roller Bearing
- Thrust Spherical Roller Bearing
- Slewing Ring
- Super Precision Bearing
- Super Precision Angular Contact Bearings
- Super Precision Bearings
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Multi Groove Belt
- 48r4289 Belts
- Toyota Serpentine Belts
- 220j Belt
- Gates Snowmobile Belts